Re: HOWTO: FritzBox 6360/6490(kdg) FRITZ!OS 06.05 - SIP einr.
Verfasst: 08.07.2016, 12:36
Schade das die einfach Umstellung bei euch nicht funktioniert. Ich habe eben meine aller erste Backup Datei eingespielt -> Button war natürlich weg. Anschließend an dieser Backup-Datei ausschließlich gui_readonly = no; gesetzt und mit dem PHP-Skript eingespielt. Button wieder da. Somit kann ich sagen: Ich habe wirklich nur diese eine Zeile geändert.
Bezüglich der Grundkonfiguration der Box
Code: Alles auswählen
**** FRITZ!Box 6490 Cable CONFIGURATION EXPORT
Password=XXX
FirmwareVersion=141.06.50
CONFIG_INSTALL_TYPE=arm_2GB_xilinx_4eth_2ab_isdn_nt_usb_host_dect_wlan11ac_kabel_03023
OEM=avm
Country=049
Language=de
In der fx_conf beträgt die Länge der ua1-Nummer bei mir nur 39 Zeichen, obwohl sie mit 0049 angegeben ist.
Code: Alles auswählen
ua2 {
enabled = yes;
username = "620";
authname = "";
passwd = "12345";
registrar = "192.168.178.1";
ttl = 30m;
sipping_enabled = no;
sipping_interval = 280s;
name = "620";
providername = "";
ims_client = no;
with_displayname = no;
read_from_displayname = yes;
dtmfcfg = dtmfcfg_automatic;
rtpevent_keep_packetrate = no;
register_failwait = 0w;
register_failwaitmax = 30m;
stunserver = "";
stunserverport = 3478;
use_internat_calling_numb = no;
is_nat_aware = no;
localip = 0.0.0.0;
protocolprefer = protocolprefer_ipv4only;
ignore_received_header = no;
always_clir = no;
clirtype = clir_displayname;
reject_anonymous_call_with_433 = no;
colptype = colp_none;
clipnstype = clipns_off;
vad_enabled = no;
only_one_dialog = no;
presence_supported = no;
mwi_supported = yes;
mwi_inmemoria = no;
ccbs_supported = no;
reg_support = regsupport_auto;
packetization = packetization_fixed;
tx_packetsize_in_ms = 30;
xrtp_periodic = 0;
reject_refer = yes;
sip_instance = no;
no_register_fetch = no;
do_not_register = no;
only_call_from_registrar = no;
invite_without_register_allowed = no;
outboundproxy = "";
outboundproxy_without_route_header = no;
factory_3pty_uri = "";
no_hold_speech = no;
dditype = ddi_none;
ddireception = "";
webui_trunk_id = "multisip:80111023-217494-10238011-17801117";
alias_head_number = "";
cfxsignaling = cfx_standard;
backup_wanted = no;
use_session_timer = no;
use_rport = yes;
add_rtpmap_for_all_codecs = no;
answer_only_one_codec = no;
without_annexb_no = no;
srtp_supported = no;
crypto_avp_mode = crypto_mode_avp_only;
use_488_for_no_t38 = no;
g726_via_rfc3551 = no;
no_g726_32_offer_with_pt2 = no;
g726_fixed_ptime30 = no;
dtmf_inband_on_g711g722 = no;
enable_3xx = yes;
t38_reinvite_from_remote = no;
use_t38version0 = no;
rtcp_xr_media_attribute = no;
ptime_a_attribute = yes;
tones_and_announcements_for_service = no;
read_p_asserted_identity_header = no;
route_always_over_internet = yes;
sipiface = sipiface_automatic;
altc_attribute_rfc6947 = no;
send_extended_sip_client_info = no;
gui_readonly = no;
convertstate = 0;
use_dqos = no;
snmp_instance = 0;
loopback_client_username_fos = "";
loopback_client_username_pass_through = "";
directloopback_client_username = "";
}
